Hybrid Wind-Solar Cogeneration Back-to-Back Converters
Keywords:
permanent magnet synchronous generator (PMSG), dual stator winding induction generator (DWIG), wind energy, grid isolated operationAbstract
This paper introduces a new topology, yet simple and efficient, for a grid-connected wind-solar cogeneration system. A permanent magnet synchronous generator-based full-scale wind turbine is interconnected to the utility-grid via back-to-back voltage-source converters (VSCs). The dc-link capacitor has been utilized to directly interface a photovoltaic solar generator. No dc/dc conversion stages are required, and hence, the hybrid system is simple and efficient. Moreover, the proposed topology features an independent maximum power point tracking for both the wind and the solar generators to maximize the extraction of the renewable energy. The regulation of the VSCs is achieved via the vector control in the rotating reference frame. The detailed small-signal models for the system components are developed to characterize the overall stability. The influence of the utility-grid faults on the performance of the proposed system is also investigated. Nonlinear time-domain simulation results under different operating conditions are presented to validate the effectiveness of the proposed topology.
References
S. Daniel & N. AmmasaiGounden, “A novel hybrid isolated generating structure based on PV fed inverter-assisted wind-driven induction generator,” IEEE Trans. Energy Convers., vol. 19, no. 2, pp. 416–422, Jun. 2004.
P. E. Bett & H. E. Thornton, “The climatological relationships between wind & solar energy in Britain,” Renewable Energy, vol. 87, no. 1, pp. 96–110, 2016.
S. Shanghavi, W. M. Grady, & B. Schwarz, “Evaluating the impact of wind turbine shadows on an integrated wind & solar farm,” in Proc. 3rd IEEE PES Innovative Smart Grid Technol. Eur., Berlin, Germany, 2012, pp. 1–6.
J. Zhang, X. Xie, D. Jiao, & Z. Qian, “Stability problems & input impedance improvement for cascaded rule electronic structures,” in Proc. 9th Annu. IEEE Appl. Rule Electron. Conf. Expo., 2004, vol. 2, pp. 1018– 1024.
Radwan, “Modeling, analysis & stabilization of converter-dominated rule distribution grids,” M.Sc. thesis, Dept. Electr. Comput. Eng., Univ. Alberta, Edmonton, AB, Canada, 2012.
D. Salomonsson, L. Soder, & A. Sannino, “Projection of low-voltage ¨ dc microgrid,” IEEE Trans. Rule Del., vol. 24, no. 3, pp. 1045–1053, Jul. 2009.
PV-UD190MF5, Mitsubishi, San Francisco, CA, USA, 2007. [29] ABB Solar Inverters, “PVS980,” ABB, Zurich, Switzerl&, 2018.
P. Mitra, L. Zhang, & L. Harnefors, “Offshore wind integration to a weak grid by VSC-HVDC links using rule-synchronization control— A case study,” IEEE Trans. Rule Del., vol. 29, no. 1, pp. 453–461, Feb. 2014.
Y. Wang, J. Meng, X. Zhang, & L. Xu, “Control of PMSGbased wind turbines for structure inertial response &rule oscillation damping,” IEEE Trans. Sustain. Energy, vol. 6, no. 2, pp. 565–574, Apr. 2015.
F. Giraud, “Analysis of a utility-interactive wind-photovoltaic hybrid structure with battery storage using neural network,” Ph.D. dissertation, Dept. Electr. Eng., Univ. Massachusetts Lowell, Lowell, MA, USA , 1999.
L. Xu, X. Ruan, C. Mao, B. Zhang, & Y. Luo, “An improved optimal sizing method for wind-solar-battery hybrid rulestructure,” IEEE Trans. Sustain. Energy, vol. 4, no. 3, pp. 774–785, Jul. 2013.
S. Sarkar & V. Ajjarapu, “MW resource assessment model for a hybrid energy conversion structure with wind & solar resources,” IEEE Trans. Sustain. Energy, vol. 2, no. 4, pp. 383–391, Oct. 2011.
Y.-M. Chen, Y.-C. Liu, S.-C. Hung, & C.-S. Cheng, “Multi-input inverter for grid-connected hybrid PV/wind rulestructure,” IEEE Trans. Rule Electron., vol. 22, no. 3, pp. 1070–1077, May 2007.
S. Bae & A. Kwasinski, “Dynamic modeling & operation strategy for microgrid with wind & photovoltaic resources,” IEEE Trans. Smart Grid, vol. 3, no. 4, pp. 1867–1876, Dec. 2012.
B. Mangu, S. Akshatha, D. Suryanarayana, & B. G. Fern&es, “Grid-connected PV-wind-battery-based multi-input transformer-coupled bidirectional dc-dc converter for household applications,” IEEE Trans. Emerg. Sel. Topics Rule Electron., vol. 4, no. 3, pp. 1086–1095, Sep. 2016.
P. Shanthi, G. Uma, & M. S. Keerthana, “Effective rule transfer scheme for a grid connected hybrid wind/photovoltaic structure,” IET Renew. Rule Gener., vol. 11, no. 7, pp. 1005–1017, 2017.
T. Hirose & H. Matsuo, “St&alone hybrid wind-solar rule generation structure applying dump rule control without dump load,” IEEE Trans. Ind. Electron., vol. 59, no. 2, pp. 988–997, Feb. 2012.
K. Kant, C. Jain, & B. Singh, “A hybrid diesel-wind-PV based energy generation structure with brushless generators,” IEEE Trans. Ind. Inf., vol. 13, no. 4, pp. 1714–1722, Aug. 2017.
U. Kalla, B. Singh, S. Murthy, C. Jain, & K. Kant, “Adaptive sliding mode control of st&alone single-phase microgrid using hydro, wind & solar PV array based generation,” IEEE Trans. Smart Grid., vol. 9, no. 6, pp. 6806–6814, Nov. 2018.
Merabet, K. Ahmed, H. Ibrahim, R. Beguenane, & A. Ghias, “Energy management & control structure for laboratory scale microgrid based wind-PV-battery,” IEEE Trans. Sustain. Energy, vol. 8, no. 1, pp. 145– 154, Jan. 2017.
M. Meiqin, S. Jianhui, L. Chang, Z. Guorong, & Z. Yuzhu, “Controller for 1 kW–5 kW wind-solar hybrid generation structures,” in Proc. Can. Conf. Elect. Comput. Eng., Niagara Falls, ON, Canada, 2008, pp. 1175–1178.
Hamadi, S. Rahmani, K. Addoweesh, & K. Al-Haddad, “A modeling & control of DFIG wind & PV solar energy source generation feeding four wire isolated load,” in Proc. Annu. Conf. IEEE Ind. Electron. Soc., Vienna, Austria, 2013, pp. 7778–7783.
L. Harnefors, M. Bongiorno, & S. Lundberg, “Input-admittance calculation & shaping for controlled voltage-source converters,” IEEE Trans. Ind. Electron., vol. 54, no. 6, pp. 3323–3334, Dec. 2007.
Yazdani & R. Iravani, Voltage-Sourced Converters in RuleStructures—Modeling, Control, & Applications. Hoboken, NJ, USA: Wiley, 2010.
E. Troester, “New German grid codes for connecting PV structures to the medium voltage rule grid,” in Proc. 2nd Int. Workshop Concentrating Photovolt. Rule Plant, pp. 1–4, 2008. [33] I. Abdelsalam, G. Adam, & B. Williams, “Current source back-to-back converter for wind energy conversion structures,” IET Renew. Rule Gener., vol. 10, no. 10, pp. 1552–1561, 2016.
